Marine Grade Aluminum Roll Coil 0.2mm 1100 5052 5083 6061 6083 7075 3003 100mm

Product Description

What is 7075 aluminum used for?

7075 is widely used for construction of aircraft structures, such as wings and fuselages. Its strength and light weight are also desirable in other fields. Rock climbing equipment and bicycle components are commonly made from 7075 aluminium alloy. The bicycle industry is also using 7005 and 6061 aluminium alloys.

Is 7075 aluminum hard to machine?

7075 bar and plate is a commonly used commercial grade of very high strength aluminium. L95 is the aerospace approved equivalent. 7075 is considered to have fair/average machinability. It machines very similarly to aluminium 6082T6.

Is 7075 aluminum as strong as steel?

It is one of the strongest commercially available alloys, with a strength comparable to many steels. 7075 aluminum shows good fatigue strength and average machinability, however it is less resistant to corrosion than many other Aluminum alloys.

What are the advantages of 7075 aluminum?

The most important benefit of 7075 aluminum is its high strength. While it does not have the same level of corrosion resistance or weldability that other common alloys due, its resistance to stress and strain makes it highly useful in aerospace applications where it allows for weight savings over steel.

Products Name	Aluminium Coil
Alloy/Grade	1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021
Temper	F, O, H	MOQ	5T for customized, 2T for stock
Thickness	0.014mm-20mm	Packaging	Wooden Pallet for Strip & Coil
Width	60mm-2650mm	Delivery	15-25days for production
Material	CC & DC route	ID	76/89/152/300/405/508/790/800mm
Type	Strip, Coil	Origin	China
Standard	GB/T, ASTM, EN	Loading Port	Any port of China, Shanghai & Ningbo & Qingdao
Surface	Mill Finish, Anodized, Color coated PE Film Available	Delivery Methods	By sea: Any port in China
Certificates	ISO, SGS

Alloy Series	Typical Alloy	Introduction
1000 Series	1050 1060 1070 1100	Industrial Pure Aluminium. In all series, 1000 series belongs to the series with the largest aluminium content. The purity can reach over 99.00%.
2000 Series	2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17	Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%.
3000 Series	3A21, 3003, 3103, 3004, 3005, 3105	Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function.
4000 Series	4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A	Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance.
5000 Series	5052, 5083, 5754, 5005, 5086,5182	Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high elongation.
6000 Series	6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02	Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance.
7000 Series	7075, 7A04, 7A09, 7A52, 7A05	Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform or warp after processing.

 

Chemical Composition(%)

Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Zr

Al

1235

≤0.65 (Fe+Si)

≤0.05

≤0.05

≤0.05

-

-

≤0.10

≤0.03

-

≥99.35

1145

≤0.55 (Fe+Si)

≤0.05

≤0.05

≤0.05

-

-

≤0.05

≤0.03

-

≥99.45

8011

0.50-0.9

0.6-1.0

≤0.10

≤0.20

≤0.05

≤0.05

-

≤0.10

≤0.08

-

Remainder

8079

0.50-0.3

0.7-1.3

≤0.05

-

-

-

-

≤0.10

-

-

Remainder

 



 

 
 

Package

 
 

Application

 

Company Introduction