Place of Origin:
CHINA
Brand Name:
JBHD
Certification:
ISO,SGS
Model Number:
6061
Contact Us
1050 aluminum roll characteristics
Industrial pure aluminum has the general characteristics of aluminum, small density, good conductivity, good thermal conductivity, good corrosion resistance, good plastic processing performance, can be processed into plates, bands, foil and extrusion products, etc. spot welding.
Industrial pure aluminum cannot be strengthened and enhanced, and the intensity can be increased by cold deformation. The only heat treatment form is annealing, and the crystallization starts temperature is related to impurities and deformation. Generally, it is about 200 ° C. The σb = 80 ～ 100MPa of the annealing board, σ0.2 = 30 ～ 50MPa, ζ = 35%～ 40%, HB = 25 ～ 30. After 60%to 80%cold deformation, although the chaos can increase to 150 to 180MPa, the ζ value has dropped to 1%to 1.5%.
Increasing iron and silicon impurities can increase intensity, but reduce plasticity, conductivity and corrosionability. 1200 (L5) The educational softening characteristics and cold hardening characteristics of the industrial pure aluminum plate are shown in the figure.
It can be seen from the figure that the amount of cold deformation after adjusting the cold deformation or the control of the cold deformation after control can obtain the mechanical properties of different cold hardening state. In order to improve the formability, it is better to adopt the previous method.
|
1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%)
|
|
|
Purity
|
1050 1050A 1060 1070 1100
|
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/
H26/H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C)
|
|
Application
|
Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc.
|
|
Feature
|
Lid Shigh conductivity, good corrosion resistant performance, high latent heat
of melting, high-reflectance, well welding property, low strength, and not suitable for heat treatments. |
|
2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element)
|
|
|
Alloy
|
3003 3004 3005 3102 3105
|
|
Temper
|
O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/
H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C)
|
|
Application
|
Decoration, heat-sink device, external walls, storage, sheets for construction, etc.
|
|
Feature
|
Good rust resistance, not suitable for heat treatments, good corrosion resistant
performance, well welding property, good plasticity, low strength but suitable for cold working hardening |
|
3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element)
|
|
|
Alloy
|
5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06
|
|
Temper
|
O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34
H16/H26/H36 H18/H28/H38 H114/H194, etc. |
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
|
Application
|
Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile
Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
|
Feature
|
All the advantages of normal aluminium alloy, high tensile strength & yield strength,
good corrosion resistant performance, well welding property, well fatigue strength, and suitable for anodic oxidation. |
|
4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements )
|
|
|
Alloy
|
6061 6063 6082
|
|
Temper
|
O F, etc.
|
|
Specification
|
Thickness≤170mm; Width≤2200mm ; Length≤12000mm
|
|
Application
|
Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components,
Transport Ship, Semiconductor Equipments, etc |
|
Feature
|
Good corrosion resistant performance, well welding property, good oxidability,
easy to spray-finishing, well oxidation coloring, good machinability. |
Send your inquiry directly to us
