1060 pure aluminum plate introduction
1060 pure aluminum plate, aluminum content of 99.6%, also known as pure aluminum plate, is a common series in the aluminum plate belt family. The advantages of this series of aluminum plate: for the commonly used series, the production process is relatively single, the technology is relatively mature, the price compared with other high-grade alloy aluminum plate has a huge advantage. Good elongation and tensile strength, fully able to meet the conventional processing requirements (stamping, tensile) high molding.
1050 pure aluminum plate introduction
1050 pure aluminum plate is a product of pure aluminum plate series, and the chemical composition and mechanical properties of 1060 series products are similar, and it is basically replaced by 1060 aluminum plate belt in application. The last two Arabic numerals of 1050 series are 50. According to the international naming principle, the aluminum content must reach 99.5% or more for qualified products. China's aluminum alloy technical standard (GB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is a series commonly used in conventional industry. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment, cutting is not good, can accept contact welding, gas welding.
1100 pure aluminum plate introduction
1100 pure aluminum plate is industrial pure aluminum, aluminum content (mass fraction) is 99.00%, can not be strengthened by heat treatment. With high corrosion resistance, electrical conductivity and thermal conductivity, its density is small, good plasticity, through pressure processing can produce a variety of aluminum, but low strength. Other process performance is basically the same as 1050A. 1100 is usually used to require good forming processing performance, high corrosion resistance, do not need high strength, such as food and chemical handling and storage equipment, sheet metal products, hollow hardware with drawing goods spinning processing, welding combination key, reflector, nameplate, etc.