Place of Origin:
CHINA
Brand Name:
JBHD
Certification:
ISO,SGS
Model Number:
1050
Contact Us
Video
The 1050 aluminum roll contains more than 99.5%, which is one of the industrial pure aluminum.
1050 aluminum rolls have the characteristics of high plasticity, corrosion resistance, good conductivity and heat conduction, but the intensity is low.
The 1050 aluminum roll belt belongs to a product in the pure aluminum board series, which is close to the chemical composition and mechanical properties of the 1060 series products.
The application is basically replaced by 1060 aluminum plate. The last two Arabic numerals of the 1050 series are 50. According to the international brand naming principle, the aluminum content must reach 99.5%as a qualified product. my country's aluminum alloy technical standards (GB/T3880-2006) also clearly stipulate that 1050 aluminum content reaches 99.5%. Because it does not contain other technical elements, the production process is relatively single and the price is relatively cheap. It is the most commonly used series in conventional industries. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good conductivity and heat conductivity, but low strength, not reinforced by heat treatment, poor cutability, acceptable contact welding, gas welding.
| Products Name | Aluminium Coil | ||
| Alloy/Grade | 1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021 | ||
| Temper | F, O, H | MOQ | 5T for customized, 2T for stock |
| Thickness | 0.014mm-20mm | Packaging | Wooden Pallet for Strip & Coil |
| Width | 60mm-2650mm | Delivery | 15-25days for production |
| Material | CC & DC route | ID | 76/89/152/300/405/508/790/800mm |
| Type | Strip, Coil | Origin | China |
| Standard | GB/T, ASTM, EN | Loading Port | Any port of China, Shanghai & Ningbo & Qingdao |
| Surface | Mill Finish, Anodized, Color coated PE Film Available |
Delivery Methods |
By sea: Any port in China
|
| Certificates | ISO, SGS | ||
| Alloy Series | Typical Alloy | Introduction |
| 1000 Series | 1050 1060 1070 1100 | Industrial Pure Aluminium. In all series, 1000 series belongs to the series with the largest aluminium content. The purity can reach over 99.00%. |
| 2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 | Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%. |
| 3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 | Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function. |
| 4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A | Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance. |
| 5000 Series | 5052, 5083, 5754, 5005, 5086,5182 | Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high elongation. |
| 6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 | Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance. |
| 7000 Series | 7075, 7A04, 7A09, 7A52, 7A05 | Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform or warp after processing. |
| Chemical Composition(%) | ||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al | |
| 1235 | ≤0.65 (Fe+Si) |
≤0.05 | ≤0.05 | ≤0.05 | - | - | ≤0.10 | ≤0.03 | - | ≥99.35 | ||
| 1145 | ≤0.55 (Fe+Si) |
≤0.05 | ≤0.05 | ≤0.05 | - | - | ≤0.05 | ≤0.03 | - | ≥99.45 | ||
| 8011 | 0.50-0.9 | 0.6-1.0 | ≤0.10 | ≤0.20 | ≤0.05 | ≤0.05 | - | ≤0.10 | ≤0.08 | - | Remainder | |
| 8079 | 0.50-0.3 | 0.7-1.3 | ≤0.05 | - | - | - | - | ≤0.10 | - | - | Remainder | |
Send your inquiry directly to us
