All Products
Contact Person :
Alina
Phone Number :
8618552180192
WhatsApp :
+8618552180192
T3 - T8 6063 Aluminum Alloy Billet Bars Round Solid Rod 6082 6061 6068
Product Details
Al (Min) | 90-99.9 | Temper | T3 - T8 |
---|---|---|---|
Hardness | 40 | Surface | Mill Finish Polished |
Certification | ISO9001 | Material | Aluminun Alloy |
Price Term | EXW FOB CIF CFR | ||
High Light | Aluminum Alloy Billet Bars Solid Rod,Aluminum Alloy 6063 Billet Bars Rod,T3 - T8 Aluminum Alloy Bars Rod |
Product Description
6063 6082 6061 6068 Aluminum Alloy Bar Aluminum Billet Bars Round Solid Rod
Analysis of Surface Corrosion of 6063 Aluminum Alloy Profiles
(1) Sometimes the proportion of magnesium and silicon during the melting process is not suitable for some reasons, so that the omega (mg)/ω (si) is less than 1.0 to 1.3, which is much smaller than the best ratio (generally controlled in general control (generally controlled in the control in Within 1.3 ~ 1.5). In this way, although the content of magnesium and silicon components is within the range of regulations (ω (mg) = 0.45%~ 0.9%, ω (si) = 0.2%~ 0.6%). However, some surplus silicon exists. In addition to the existence of a small amount of silicon in this part of the existence of surplus silicon, the three yuan compounds will be formed in the aluminum alloy at the same time. When ω (si) <Ω (Fe), more α (al12fe3si) phase is formed. It is a crispy compound, when ω (si) > ω (Fe) The phase is a more crispy needle -shaped compound. Its harmful effect is larger than α, which often makes the alloy easily break along it. These insoluble impurities or free-state impurities formed in the alloy often gather in the crystal world, while weakening the strength and toughness of the crystal world [1-3], becoming the weak link with the most erosion resistance. produce.
(2) During the melting process, although the proportion of magnesium and silicon is within the scope specified in the standard, sometimes due to uneven and insufficient stirring, the silicon distribution in the melt is uneven. Area. Because the solubility of silicon in aluminum is very small, the common crystal temperature is 1.65%when the co -crystal temperature is 577 ° C, and the room temperature is only 0.05%. After the casting rod is cast, the ingredients are uneven. When there are a small amount of free -state silicon in the aluminum matrix, not only reduces the resistance of the alloy, but also the grains of crude alloy .
(3) Control of various process parameters during squeezing, such as the preheating temperature of the stick, the control of the metal extrusion, the air -cooled strength, the timeliness of the time temperature, and the insulation time of the metal extrusion, and the time control time. Magnesium and silicon did not fully become MG2Si phases, but some of them existed with silicon.
Item | 2024 6061 6101 Aluminium rod |
Standard | GB/T 3191-1998,ASTM B221M-05a,JIS H4040-2006,ASTM B211M-03,and so on. |
Material |
1000 Series:1050,1060,1100,1200,A1100BE,A1100BD,A1100W 2000Series:2024,2024(t3,t4,t351),2A12,2A14,2014,A2024BE,A2024BD,A2024W,A2014BE,A2014BD, 3000 Series:3003,3004,A3003BE,A3003BBD,A3003W, 5000 Series:5052,5454,5083,5086,5056,5A05,5456,A5052BE,A5052BD,A5052W,A5056BD,A5056W, A5056BE 6000 Series:6061,6061(LD30),6A02,6063AB,6101,A6061BE,A6061BD,A6061W,A6063BE,A6063BD, A6063W 7000 Series:7075,7003,7005, 7175. 7178. 7079 8000 series:8011,8021,8079 etc |
Out Diameter | 2mm~800mm |
Length | 1m,3m,5.8m,6m,12m or as required |
Surface finish | Mill finish,polished,anodizing,brushing,sand blasting,powder coating,threaded, oxide,mirror,2b,ba |
Package | Standard export seaworthy or as customers' requirements |
Application | 1.Aircraft structure, rivets, truck wheels, propellers component and other components 2.Belong to building materials, machinery parts, forging materials, welding materials; Low melting point, good corrosion resistance 3.Petroleum industry,chemical industry,building and other sides. |
Export | Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA,Brazil,Thailand,Iraq, Russia,Holland,Turkey,Kuwait,Korea,Iran,India,Egypt,Oman,Malaysia,Peru,Vietnam,Mexico,etc |
Material table
|
Product use
|
|
1000 series
|
1050
|
Food, chemical and extrusion coils, various hoses, fireworks powder
|
1060
|
Chemical equipment is its typical use
|
|
1100
|
Chemical products, food industry installations and storage containers, weldments, heat exchangers, printed boards, nameplates and reflective appliances
|
|
|
2024
|
Aircraft structures, rivets, missile components, truck hubs, propeller components and other structural components
|
2A12
|
Aircraft skin, spacer frame, wing rib, wing beam, rivet, etc., and structural parts of buildings and transportation vehicles
|
|
2A14
|
Free forging and die forging with complex shape
|
|
3000 series
|
3003
|
Kitchen utensils, food and chemical products, storage equipment, storage tanks for transporting liquid products, and various pressure vessels and pipelines
|
3004
|
Chemical product production and storage devices, plate processing parts, building processing parts, building tools and various lamp parts
|
|
3105
|
Room partition, baffle, movable room board, eaves gutter and downpipe, sheet forming parts, bottle caps, corks, etc
|
|
4000 series
|
4032
|
Piston, cylinder head
|
4043
|
Building distribution frame
|
|
4343
|
The products are widely used in automobiles, water tanks, radiators, etc.
|
|
5000 series
|
5052
|
Aircraft fuel tank, oil pipe, traffic vehicle and ship sheet metal parts, instruments, street lamp supports and rivets, hardware products, etc
|
5083
|
Plate Weldments of ships, automobiles and aircraft; Pressure vessel, refrigeration device, TV Tower, drilling equipment, transportation equipment
|
|
5754
|
Storage tanks, pressure vessels, ship materials
|
|
|
6005
|
Ladder, TV antenna, etc
|
6061
|
Pipes, rods, profiles and plates for trucks, towers, ships, trams, furniture, mechanical parts, precision machining, etc
|
|
6063
|
Building profiles, irrigation pipes and extruded materials for vehicles, stands, furniture, fences, etc
|
|
|
7075
|
It is used for manufacturing aircraft structure and other high stress structural parts and molds with high strength and strong corrosion resistance
|
7175
|
High strength structure for forging aircraft.
|
|
7475
|
Aluminum clad and non aluminum clad plates for fuselage, wing frame, stringer, etc. Other parts with high strength and high fracture toughness
|
|
8000 series
|
8011
|
The aluminum plate with bottle cap as the main function is also used in radiators, most of which are used in aluminum foil products
|
Product Show
Company Introduction
Certification
Recommended Products