Place of Origin:
CHINA
Brand Name:
JBHD
Certification:
ISO,SGS
Model Number:
1050/1060/1070/1100/3003/5052/5083/6061/6063
Contact Us
What is 6061 aluminium alloy used for?
| Type | Chemical Composition For several alloys | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | other | Al | |
| 1060 | 0.20 | 0.25 | 0.30 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 99.60 |
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | 99.50 |
| 3003 | 0.60 | 0.70 | 0.05-0.20 | 1.0-1.5 | 0.10 | 0.15 | Remain | ||
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.10 | ------ | 0.2 | Remain |
|
Specification of Aluminium coil
|
||||
|
Alloy No.
|
Thickness
(mm) |
Width
(mm) |
Temper
|
|
|
A1050,A1060, A1070,A1100,A1235,A1245
|
0.2-3.0
|
20-1900
|
O,H12,H22,H14,H24,H16,H26,H18
|
|
|
4.0-12.0
|
1000-1900
|
H111,H112
|
||
|
A3003,A3004,A3105
|
0.2-4.0
|
20-1900
|
O,H12,H22,H14,H24,H16,H26,H18
|
|
|
4.0-12.0
|
1000-1900
|
H111,H112
|
||
|
A5052,A5083,A5754,A5005
|
0.2-4.0
|
20-1900
|
O,H12,H22,H14,H24,H16,H26,H18
|
|
|
4.0-12.0
|
1000-1900
|
H111,H112
|
||
|
A6061,A6082,A6063
|
0.8-3.0
|
20-1900
|
O
|
|
|
A8011,A1145,A1235
|
0.005-0.2
|
20-1700
|
O,,H18,H24
|
|
|
ID
|
|
76mm,152mm,200mm,300mm,505mm
|
||
|
Packing : Standard Seaworthy package
|
||||
|
Standards:ASTM-B209. EN573-1, GB/T3880.1-2006
|
||||
|
Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set
|
||||
|
Application : Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect
|
||||
|
MOQ
|
5 tons
|
|||
|
Payment term:
|
TT,L/C, West Union
|
|||
|
Delivery Time
|
15 days after 30% TT payment
|
|||
|
Kind attention : Specifications can be customized as the customer's requirements.
|
||||
FAQ:
Q1: What's your terms of payment?
A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.
Q2: What's the terms of delivery?
A: EXW, FOB, CFR, CIF
Q3: What's your delivery time?
A: For stocks, we could transport the goods to loading port within 15 work days after we received the deposit.For productionperiod, it usually takes about 15 days to 30 days after we received the deposit.
Q4: Could you produce according to the samples?
A: Yes, we can customer-made by your samples or technique drawings.
Q5: Could youprovide the compliment samples?
A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.
Send your inquiry directly to us
