Place of Origin:
CHINA
Brand Name:
JBHD
Certification:
ISO,SGS
Model Number:
AlMg4.5 Mn0.4
Contact Us
Video
Alloy: EN AW-5182/AlMg4.5Mn0.4 AlMg5Mn/3.3549 5182(A-G4.5M)A95182 Allloy A5182.
Temper: F or O,H112, H48
Thickness: 0.01~ 14mm,
Width: 5-1800mm,
Inner diameter: 610mm,505mm,
Max Outer diameter: 2560mm,
Max weight per coil: 28 ton,
Application: cans end ring-pull, Beer ends , drink lids ,beverages lids ,beer lids
Al - 5186 - Mg alloy, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment strengthening, and in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished. Purpose is mainly used for high plasticity and good weldability, working in a liquid or gas medium low load parts, such as E-mail, gas or oil duct, and other various liquid containers made of deep drawing small load parts: wire used for rivet.
Features:
Aluminum plate for Al - 5182 Mg of antirust aluminum, 5182 performance similar to 5 how a02 aluminum plate, but because of a little higher than 5 how a02 magnesium content, and added a small amount of silicon, so the weldability is better than 5 how a02, 5182 aluminum plate with gas welding and argon arc welding, spot welding and welding seam welding performance is very good, other performance has no big difference.
5182 belong to Al - Mg alloy, using a wide range, especially construction cannot leave the alloy, is the most promising alloy. Good corrosion resistance, good weldability, cold workability is good, and with moderate intensity. 5052 main alloy elements for magnesium, has good forming performance, corrosion resistance, weldability and medium strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
FAQ:
Q1: What's your terms of payment?
A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.
Q2: What's the terms of delivery?
A: EXW, FOB, CFR, CIF
Q3: What's your delivery time?
A: For stocks, we could transport the goods to loading port within 15 work days after we received the deposit.For productionperiod, it usually takes about 15 days to 30 days after we received the deposit.
Q4: Could you produce according to the samples?
A: Yes, we can customer-made by your samples or technique drawings.
Q5: Could youprovide the compliment samples?
A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.
Send your inquiry directly to us
