Place of Origin:
CHINA
Brand Name:
JBHD
Certification:
ISO,SGS
Model Number:
5754 5056 5456 5082 5182 5183 5086
Contact Us
What is aluminum alloy grade 5086?
5086 is an aluminium alloy, primarily alloyed with magnesium. It is not strengthened by heat treatment, instead becoming stronger due to strain hardening, or cold mechanical working of the material.
What is 5086 aluminum used for?
The good weldability and corrosion properties in seawater make 5086 extremely popular for vessel gangways, and boat/yacht hulls. It is considered a sister alloy to Aluminum 5083 with comparable characteristics but slightly less strength. Typical uses for 5086 Aluminum include: Seawater Applications.
What is marine grade aluminum 5086?
5086-H32 aluminum sheet is normally used for marine, cryogenic, piping, military, chemical, and natural gas/petroleum/oil applications. 5086 aluminum has a higher strength capacity than 5052 or 5083. 5086-H32 aluminum plate has superior corrosion resistance, moderate strength, and good formability.
Can you bend 5086 aluminum?
5086 Aluminum is a marine grade aluminum alloy that is commonly used in marine, oil drilling, and aircraft applications. This grade of aluminum is a popular choice in marine vessels because it's more flexible than other grades which makes it less likely to crack when the movement of a ship causes it to bend.
| Products Name | Aluminium Coil | ||
| Alloy/Grade | 1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021 | ||
| Temper | F, O, H | MOQ | 5T for customized, 2T for stock |
| Thickness | 0.014mm-20mm | Packaging | Wooden Pallet for Strip & Coil |
| Width | 60mm-2650mm | Delivery | 15-25days for production |
| Material | CC & DC route | ID | 76/89/152/300/405/508/790/800mm |
| Type | Strip, Coil | Origin | China |
| Standard | GB/T, ASTM, EN | Loading Port | Any port of China, Shanghai & Ningbo & Qingdao |
| Surface | Mill Finish, Anodized, Color coated PE Film Available |
Delivery Methods |
By sea: Any port in China
|
| Certificates | ISO, SGS | ||
| Alloy Series | Typical Alloy | Introduction |
| 1000 Series | 1050 1060 1070 1100 | Industrial Pure Aluminium. In all series, 1000 series belongs to the series with the largest aluminium content. The purity can reach over 99.00%. |
| 2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 | Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%. |
| 3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 | Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function. |
| 4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A | Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance. |
| 5000 Series | 5052, 5083, 5754, 5005, 5086,5182 | Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high elongation. |
| 6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 | Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance. |
| 7000 Series | 7075, 7A04, 7A09, 7A52, 7A05 | Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform or warp after processing. |
| Chemical Composition(%) | ||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al | |
| 1235 | ≤0.65 (Fe+Si) |
≤0.05 | ≤0.05 | ≤0.05 | - | - | ≤0.10 | ≤0.03 | - | ≥99.35 | ||
| 1145 | ≤0.55 (Fe+Si) |
≤0.05 | ≤0.05 | ≤0.05 | - | - | ≤0.05 | ≤0.03 | - | ≥99.45 | ||
| 8011 | 0.50-0.9 | 0.6-1.0 | ≤0.10 | ≤0.20 | ≤0.05 | ≤0.05 | - | ≤0.10 | ≤0.08 | - | Remainder | |
| 8079 | 0.50-0.3 | 0.7-1.3 | ≤0.05 | - | - | - | - | ≤0.10 | - | - | Remainder | |
Send your inquiry directly to us
